Ten loop tactics
Instant, delayed and follower zones, 24-hour audible and silent ones, a panic button, fire tactics A, B and C, and a key zone.
Panel
SAQFIRE-24
Fire and intruder parts in one enclosure. A GSM link, backup power and over-the-air firmware updates with a digital signature.
24
loops
Specifications
- Loops
- 24
- Link
- LAN + GSM/LTE
- Backup power, h
- 24
- Partitions (groups)
- ≤ 24
- Users
- 16
- Monitoring relays
- 4
- Event log, entries
- 16 384
- Delay, s
- < 3
- Firmware updates
- OTA
- Mains input, V
- 110–240
- Operating temperature, °C
- −30…+50
- Service life, years
- 10
The panel takes loops from fire and intruder detectors, classifies the event and sends it to the console over GSM. Power is backed up so the site stays reachable when mains fails.
Capabilities
Fire and intruder in one unit
One panel instead of two: both event types reach the console over the same link.
GSM link
The alarm does not depend on internet or mains power at the site.
Up to 24 hours on battery
The site stays reachable when mains power goes out.
Over-the-air firmware
Updates carry a digital signature, with no visit to the site.
Arming by area
Parts of the site are armed separately.
Night mode
The perimeter stays armed while interior zones are off.
Keys and key zone
Arm with Touch Memory keys or an external key switch, no code required.
Duress code
Disarming proceeds as usual while a silent alarm goes to the console.
Battery protection
On critical discharge the panel goes to deep sleep and wakes by itself when mains power returns.
Output line supervision
Siren, lamp and trigger lines are monitored for breaks and short circuits.
Documentation
What else the panel can do
Operating manual · edition 1.5 · firmware 1.0.0.237
Two communication channels
Ethernet and GSM/LTE with automatic switchover. Events go to the console and the cloud, SMS follows an event mask.
Power under control
Buffered battery charging, deep sleep on critical discharge and automatic wake-up when 220 V mains returns.
Guarded access
16 users with PIN codes and Touch Memory keys. Five wrong attempts lock the keypad and report a code-guessing attempt to the console.
Guides
Installation and operation guides
For installers
Installing SAQFIRE-24
Mounting the panel on site: location, power, antenna and first start.
For installers
Wiring the loops
Laying out fire and intruder detectors across the 24 loops of the panel.
For installers
Over-the-air firmware update
How the panel receives new firmware without a site visit.
For installers
Quick zone layout with jumpers
Jumpers J1–J3 set a typical layout for all 24 zones without a computer — meant for initial commissioning.
For installers
Programming from the keypad
Basic setup of zones, partitions, users and outputs right on the panel, no computer needed.
For site owners
Adding Touch Memory keys
How to bind an electronic key to a user through the app or the configurator.
Telluswhatneedsautomating
We will answer plainly: what existing products cover, what has to be built and how long it takes. If the task is not ours, we will say so.